FEATURES:
* Eighty bright LEDs deliver a smooth and powerful purple beam.
* The purple beam color is safer for eyes and skin than UltraViolet.
* Perfect for inspection of Sherwin-Williams™ Blue OAP coatings.
* Peak wavelength is 410nm, overall bandwidth is 405nm to 415nm.
* Conservatively-driven LEDs have 10,000+ hour typical lifespan.
* Power regulation circuitry maintains consistent beam brightness.
* Convenient handle-mounted trigger switch has continuous-on latch.
* Has a supplemental white-light LED with a separate slide switch.
* User-replaceable long-life sealed-lead-acid rechargeable battery.

Features:
* Delivers more than 90 minutes of runtime from a full charge.
* A flashing low-battery indicator lets you know to recharge.
* Built-in 120VAC charger system with a one-foot stub cord.
* Also charges from the included 12VDC automotive plug cord.
* A red indicator LED flashes when charging has completed.
* Rugged housing is splash-resistant (but not submersible).
* Shatter-resistant polycarbonate front lens with o-ring seal.
* Rubber over-molding on handle grip, lens bezel and base.
* Kit includes molded carrying case and yellow filter glasses.
* One-year limited factory warranty from TNC Solutions Inc..

With eighty bright LEDs, this rugged hand-held unit provides the smooth beam image and extended range you need for this specialized application. Made especially for Flashlights Unlimited, our new TNC Solutions Inc. 410 lantern may also be appropriate for other applications, in situations where a suitable fluorescent response can be achieved with the longer and less dangerous 410nm peak wavelength. Cooler running and lighter in weight than hot and heavy high-intensity UV lamps. AC & DC rechargeable design provides convenient cordless operation and dramatically reduces operating costs.

Great for Inspection work! Use in hotels, bathroom, pest control, carpet cleaning, warehouse, trailer, etc. to illuminate human secretions, animal urine, etc.

OPERATION
A two-position ON/OFF push-button switch, located near the front of the handle, controls the operation of the primary 410nm beam. The primary beam can be continuously operated for up to 90 minutes on a full battery charge. Never operate the lantern during charging. The secondary white light is controlled by a small slide switch, located on the back of the lantern housing. It can be operated for up to 50 hours on a full battery charge. The primary beam will flash intermittently when the battery charge is depleted. Immediately turn off the lantern and fully recharge it, to avoid a potential reduction of the useful battery life.

CHARGING
DO NOT operate the lantern during charging. The lantern has both 120VAC and 12VDC ports for charging power. Both ports are located on the back of the lantern housing, and both are covered by protective rubber boots. Use only one of these two ports at any one time. If using the 120VAC port, attach any standard three-prong power cord or extension cord, and be certain that the power source is 110VAC to 120VAC at 60Hz (use of any other power source will damage the internal charger circuitry and void the warranty). If using the 12VDC port, plug the included charging cable into a standard 12VDC automotive cigarette lighter socket. A red indicator LED on the back of the lantern housing will light when the unit is charging. When the battery has been fully recharged, the red indicator will flash. The battery cannot be overcharged by the internal circuitry, and no damage will occur if the unit is left charging for an extended period. Replace the protective covers on both ports when charging has been completed, to prevent intrusion of dirt or moisture.

CAUTION: Device emits intense UV radiation: Avoid direct or strongly reflected exposure.